Government Funded Courses in TAS

A Certificate II in Community Pharmacy SIR20116 is for students wanting careers as Pharmacy Assistants. This qualification focuses heavily on the retail skills required to work in a pharmacy but also teaches students about the laws and Pharmacy Board of Australia Guidelines for supplying scheduled medicines. Note: to complete this qualification students must complete 40-80 hours work placement at a pharmacy. The Certificate II in Community Pharmacy SIR20116 is a nationally recognised training qualification and part of the official Retail Services Training Package.

A Certificate III in Community Pharmacy SIR30116 is for students needing the practical skills to work in a pharmacy as a retail assistant. Students graduate knowing how to assist customers with a range of products: skin and anti-fungal; cough and cold relief; analgesic and anti-inflammatory; gastro-intestinal conditions; allergy relief; as well as support the on-site pharmacist. The Certificate III in Community Pharmacy SIR30116 is a nationally recognised training qualification and part of the official Retail Services Training Package.

A Certificate IV in School Age Education and Care CHC40113 is perfect for students needing the skills to educate children in Australian out-of-school and vacation programs. Completing a total of 20 units, students graduate ready to support the holistic development of children in school age care. The Certificate IV in School Age Education and Care CHC40113 is a nationally recognised training qualification and part of the official Community Services Training Package.

Become a qualified personal trainer with the SIS40221 Certificate IV in Fitness. This nationally recognised certificate will teach you how to develop personalised exercise programs for clients and help them reach their fitness goals. The course begins with an introduction to human anatomy and physiology as well as the fundamentals of health science and nutrition. You’ll also learn how to carry our client fitness assessments, lead group training sessions, and instruct clients on gym-based exercise and fitness equipment. Enquire now for entry requirements, the list of study units, and upcoming course dates in your area.

Get the skills you need to install and configure wired and wireless security systems with the UEE31420 Certificate III in Security Equipment. This hands-on qualification is recognised by employers and workplaces all over Australia. The course covers: security industry ethics and protocols, OHS practices and workplace safety, fabricating electronic components, using electrical diagrams and drawings, repairing electrotechnology equipment, laying wires and cables, assembling and setting up security systems, installing and testing large security systems. Enquire now for the full skill set, entry requirements, and enrolment dates.

Learn how to repair and rewind electric motors with the UEE30620 Certificate III in Electrical Machine Repair. The skills you’ll gain in this nationally recognised qualification can be applied to a wide range of industries including production machinery, manufacturing plant, refrigeration systems, instrumentation, and telecommunications equipment. The course covers: developing skills and competencies in electrical machine repair work, on-the-job safety, problem solving and diagnostic testing in AC and DC circuits, working from drawings and diagrams, single and three phase machines, working with electromagnetic devices, winding electrical coils, safely disconnecting and reconnecting motors, and much more. Enquire now for the list of entry requirements, career outcomes, and upcoming enrolment dates.

The SIR40216 Certificate IV in Community Pharmacy Dispensary is the course you need to work at the chemist or drugstore dispensing prescriptions under a qualified pharmacist. Over 12 months of study you will learn how to assist customers with their prescriptions and accurately dispense pharmacy-only medicines. The course also covers infection controls, retail skills, and customer service. Enquire now for the list of study units, graduation outcomes, and upcoming enrolment dates.

Want to step-up to supervisor or team leader at an open cut mine or quarry? How about the Certificate IV in Surface Extraction Operations (RII40120)? This nationally recognised qualification will teach you how to supervise small work teams, while implementing the site’s safety, environmental, and quality systems. The course covers: risk management and site compliance, leadership and communication, maintaining site safety, responding to site emergencies, applying the pit plan, administration and computers. There is also scope to gain leadership skills in blasting, dredging, stable mining, surface coal mining, overburden dump operations, mobile plant operations, and much more. Enquire now for the list of study units, mining leadership competencies, and available enrolment dates.

Become a production operator at open-cut mines and quarries with the RII30120 Certificate III in Surface Extraction Operations. This nationally recognised qualification begins with the essential communication skills, environmental and safety protocols required at mining industry jobsites — personal safety, following WHS procedures, applying risk management processes while digging or drilling, identifying environmental and heritage issues. You’ll then gain the technical skills you need to begin working as a production operator: assessing ground conditions, building and maintaining routes for autonomous operations, surface blast hole drilling, dredging, surface miner operations, controlling automated plant/machinery, and much more. Enquire now for the list of study units, job appointment possibilities, and upcoming course dates.

The Certificate IV in Laboratory Techniques is an advanced program that focuses on refining students' laboratory skills and techniques, preparing them for roles that require greater responsibility and expertise. Through specialized training in data analysis, quality control, and advanced instrumentation, graduates will be equipped to undertake complex scientific investigations and contribute significantly to research and development projects across diverse industries.

The Certificate III in Laboratory Skills is a comprehensive program designed to equip students with fundamental knowledge and practical skills required to work effectively in a laboratory environment. Through hands-on training and theoretical instruction, learners will gain proficiency in conducting experiments, using laboratory equipment, and adhering to safety protocols, preparing them for entry-level positions in various scientific and research settings.

Become a qualified locksmith with the MEM30819 Certificate III in Locksmithing. This nationally recognised qualification is part of a trade apprenticeship in locksmithing and is completed under the guidance of a qualified tradesperson. You will learn basic trade skills (using tools, taking measurements, technical drawing) then begin producing keys, assembling lock mechanisms, installing locks and hardware, and preparing a master key system. The course also covers: workplace safety, environmental responsibilities and business technologies. Enquire now for the full list of study units, entry requirements, and upcoming enrolment dates.

The MEM30619 Certificate III in Jewellery Manufacture is part of a trade apprenticeship in jewellery making and is delivered under the guidance of a qualified jeweller. Starting with the basics, you will learn technical drawing, 2D and 3D technologies, engineering measurements and computations, using hand and precision tools, as well as workplace safety and team communication. At the same time you’ll be making jewellery, fabricating jewellery parts, and working with a range precious metals and gem materials. Graduate a trade qualified jewellery manufacturer. Enquire now for the list of entry requirements, graduation competencies, and enrolment centres near you.

The Certificate III in Engineering - Fabrication Trade (MEM31922) is the qualification for trade apprentices working under qualified boilermakers or welders. Completed over 12 months, this nationally recognised training course teaches professional level mechanical cutting, metal fabrication, and a wide range of welding processes. Students gain proficiency using hand tools, industrial machinery, taking measurements and performing calculations. Graduate ready to become a licensed tradesperson. Enquire now for more information about enrolling an apprentice or trainee in the course and the opportunity for government subsidised training.

The Certificate III in Engineering – Mechanical Trade (MEM30219) is for trade apprentices (fitters and turners, toolmakers, metal machinists) or anyone needing an entry point into mechanical engineering. It’s a nationally recognised qualification that will teach you how to work in a manufacturing or engineering environment — performing complex measurements and working to quality standards. Enquire now for information about career outcomes and opportunities for enrolment.

Become an enrolled nurse with the HLT54121 Diploma of Nursing. This nationally recognised diploma is part of the enrolled nurse registration requirements of the Nursing and Midwifery Board of Australia (NMBA). The course covers: working as a nurse within the Australian healthcare system, performing clinical assessment of patients, principles of wound management, administering medicines and intravenous therapy, nursing patients with mental health issues, monitoring acute and chronic health conditions, palliative care approaches, infection controls, ethics and legalities of nursing. Enquire now for the list of entry requirements, nursing career outcomes, and upcoming enrolment dates. PLEASE NOTE: if you are seeking registration with NMBA always check with your course provider before enrolment to ensure the correct electives are selected.

Become a licensed diesel mechanic with the AUR31520 Certificate III in Automotive Diesel Engine Technology. This nationally recognised qualification is the official training course for apprentices and trade mechanics who want to specialise in diesel vehicles and machinery. Over 4 years of on-the-job training you will learn how to diagnose, service and repair a range of diesel vehicles and machines — as well as use standard tools and equipment. The course also covers different welding techniques. Enquire now for the full list of study units and available training centres.

Learn how to service and repair cars and other light vehicles with the AUR30620 Certificate III in Light Vehicle Mechanical Technology. This nationally recognised training course delivers a full range of technical skills including mechanical inspections, testing, fault diagnosis, repair work, servicing, battery charging, and part replacement. You’ll also gain essential knowledge of WHS, environmental safety, and sustainability in the automotive industry. Enquire now for the full list of study units, entry requirements, and opportunities for enrolment.

The AUR30520 Certificate III in Marine Mechanical Technology is part of a trade apprenticeship for marine mechanics and service technicians. Over 4 years (working under a qualified tradesperson) you’ll learn how to install marine engines, controls and instruments — and carry out a range of repairs on inboard and outboard motors. Graduate as a licensed tradesperson. Enquire now for the list of entry requirements and enrolment centres.

Get the skills you need to diagnose and repair motor vehicle electrical faults with the AUR30320 Certificate III in Automotive Electrical Technology. This nationally recognised qualification prepares you for safe work in the automotive industry and delivers a full range of technical skills in the auto-electrical trade. The course covers: using electrical test equipment, testing and repairing basic electrical circuits, soldering wiring and circuits, installing vehicle lighting and wiring systems, repairing harnesses and looms, diagnosing and repairing different vehicle systems (charging, starting, ignition, instruments), and much more. Enquire now for the list of entry requirements, graduation outcomes, and enrolment centres near you.

The AUM30218 Certificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer is part of the apprenticeship in automotive manufacturing, but the course is also available to non-apprentices. Over 24-36 months you will learn how to assemble, fit-out, and finish heavy vehicles according to Australian Safety Standards — this includes assembling componentry and vehicle frames, fabricating parts, painting surfaces, testing and repairs. Enquire now for eligibility requirements, list of training centres, and opportunities for subsidised training.

The HLT37215 Certificate III in Pathology Collection is a hands-on qualification that prepares you for work in a pathology unit or testing centre. Over 6 months you will learn how to collect blood and other pathology samples — then prepare, record and despatch for testing. Choose electives from electrocardiography (ECG), first aid, recognising healthy body systems, drug and abuse testing. Enquire now for the list of study units and electives, plus your eligibility for government funded training.

Get qualified to work at an optometrist’s shop selling eyewear with the Certificate IV in Optical Dispensing (HLT47815). This is a nationally recognised qualification that can be completed over 18 months (mix of classroom and online learning). The course will teach you how to dispense optical appliances and prescriptions in accordance with strict professional standards and infection controls. You’ll also be taught the basics in customer service and retail sales.Enquire now for a list of study units and the next available intake dates.

Become an agricultural mechanic with the AUR30420 - Certificate III in Agricultural Mechanical Technology. This nationally recognised qualification will teach you how to test, repair, and maintain a broad range of agricultural machines including charging systems, starting systems, heavy vehicle compression ignition engines, HV diesel fuel injection systems, mobile plant hydraulics and braking systems, final drive assemblies, powershift transmissions. The course covers everything from workplace safety and using hand tools, to charging batteries and jump-starting vehicles. Enquire now for upcoming enrolment dates and the full list of study units.

The AUR31316 Certificate III in Automotive Engine Reconditioning is a three year apprenticeship course that teaches you how to recondition a range of car and vehicle engines. The course prepares you for work in a mechanical workshop, and begins with safety essentials and environmental responsibilities before moving into engine science, measurements, machinery, and tools. Technical skills include: non-destructive testing, crankshaft grinding, repairing bearing tunnels and connecting rods, honing and reconditioning cylinders, machining operations. Enquire now for entry requirements, employer hosting, and enrolment opportunities.

The Certificate IV in Community Pharmacy is a great way to expand your skills in pharmacy operations and services. This course is designed for pharmacy managers and senior staff and will allow you to develop specialised skills in a range of areas within a pharmacy. You’ll improve your knowledge of sales, customer service, supervising staff and administration operations. The Certificate IV in Community Pharmacy addresses a range of core and elective units. Course delivery will vary depending on your provider, but you might cover topics including assisting in dispensing prescriptions, maintaining dispensary stock, testing blood pressure and using pharmacy practices for infection control. Enquire now for a full list of study units, entry requirements and start dates.

Become a site manager at an open cut mine or quarry with the RII50120 Diploma of Surface Operations Management. This nationally recognised diploma delivers a mix of leadership and mine site operational skills. The course covers: ensuring site safety and compliance, implementing risk control strategies, implementing operational plans (environment, emergency preparedness, pit plan, ground control etc), overseeing infrastructure and mine service systems, business admin, budgeting and documentation. Enquire now for the full list of mining management competencies as well as upcoming enrolment dates.

Become a production operator at a processing facility for metals or coal with the RII30420 Certificate III in Resource Processing. This nationally recognised qualification begins with the critical communication, safety, and environmental protocols of resources industry worksites — you’ll learn how to work in accordance with issued permits, quality standards, and safety procedures. You’ll then gain the technical skills you need to work as a production operator including pipeline pigging, transferring bulk fluids in (and out) of storage, managing startup and shut down of boilers, using automated plant/machinery, instruments that emit ionising radiation, and much more. Enquire now for the list of entry requirements, graduation competencies, and upcoming enrolment dates.

Get a production role in raw materials manufacturing with the MSM30318 Certificate III in Manufactured Mineral Products. This nationally recognised qualification will teach you how to manufacture mineral products for industry, including cement, pre-cast concrete, pre-mixed concrete, quarry and asphalt. The course covers: on the job safety and situational awareness, workplace communication, cleaning workstations and equipment, taking measurements, interpreting technical drawings, reading dials and indicators, operating production equipment, receiving and despatching goods, storing materials for production, and much more. Enquire now for the full list of study units, manufacturing career outcomes, and the latest enrolment dates.

Looking for an engineering trade qualification and specialist welding skills? How about the MEM40119 Certificate IV in Engineering (Welding). This nationally recognised qualification will teach you how to carry out engineering measurements, computations, and technical drawings, plus gain proficiency in a range of advanced welding techniques. Welding competencies include: flux core arc welding, gas metal arc welding, gas tungsten arc welding, oxy fuel gas welding, carrying out welding/fabrication inspections, applying welding principles, and more. Enquire now for entry requirements, welding career outcomes, and course openings near you.

Become a professional fitness instructor with the SIS30321 Certificate III in Fitness. This nationally recognised qualification will teach you how to lead group fitness classes, undertake fitness assessments, show gym patrons how to use fitness equipment, and develop personalised health and fitness programs. The course also covers: basic anatomy and physiology, nutrition, workplace safety, time management, communication skills, and more. Enquire now for the full list of study units, fitness career outcomes, and course training providers who deliver this qualification.